|
Quintum VoIP Products
Tenor DX Series Specifications | Quintum Technologies
TENOR DX SPECIFICATIONS
CALL MANAGEMENT FEATURES
Automatic call type detection: Voice/Modem/Fax
Answer and Disconnect Supervision
Trunk group support
Public and private dial plan support
User programmable dial plan support
Forced routing
Pass-through support for calls to Toll Free, local and
special service numbers (emergency services, etc.)
Automatic appending and stripping of digits to dialed numbers
Call Detail Records
Least Cost Routing with external Quintum VoIP Call
Routing Server*
TECHNICAL SPECIFICATIONS
Telephony Specifications
Voice algorithms: G.723.1 and G.729ab, G.711
Auto codec negotiation
Fax Support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps, using industry standard T.38; Super G3 compatible up to 33.6 Kbps
Modem over IP
Choice of 2, 4, 6, or 8 T1/E1/PRI Spans
Standard RJ-45 Connectors
Coding: A-law, μ-law
Enhanced (Carrier Grade) Echo Cancellation:
ITU Rec. G 168, up to 128 msec tailsize
PRI Signaling Protocols: National ISDN-2, Euro ISDN
NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100
T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)
E1 CAS (R2 MF)
DASS2
Tandem/TDM switching
Maximum Call Rate: 7,200 calls/hour
VoIP to circuit, and circuit to circuit (Tandem/TDM) switching
IP Network Specifications
LAN Interface: Fast Ethernet port (10/100 Base-T)
Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or
100 Base-T connections
QoS Support: IP TOS, DiffServ
VoIP Network Specifications
H.323 v.3 Gateway and Integrated Gatekeeper
Support for multiple SIP User Agents (RFC3261 compliant endpoint)
DTMF Signaling via FRC 2833 or SIP Info
SIP Supplementary Services
'Any to Any' Signaling & Media Switching: SIP<->SIP, SIP <-> H.323, H.323 <-> H.323, H.323 <-> TDM, TDM <-> TDM, & SIP<->TDM.
Maximum supported IP to IP calls: 60; actual supported calls maybe lower based on system call traffic patterns.
IP transport (TCP or UDP) selection for outgoing IP calls.
Message Waiting Indicator
SIP Refer Method support
IVR/RADIUS server support for AAA with integrated
multilingual IVR
Adaptive Voice Activity Detection (VAD) with Comfort
Noise Generation (CNG)
Adaptive Jitter Buffer
Packet Loss Compensation
NATAccess - NAT/Firewall
Security: IP Filtering
Up to 120 simultaneous VoIP calls
Support for DNS-SRV
Configuration/Management
Auto-Provisionable
Quintum Tenor Configuration Manager (GUI) for
configuration of remote individual Tenors
Quintum Tenor Monitor (GUI) for alarm monitoring, call
monitoring and CDR monitoring
Remote Access with external Remote Management Session Server
SNMPv2 Agent
Command Line Interface
GENERAL SPECIFICATIONS
Dimensions (1U High Chassis)
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm x H 4.5cm x D 27.6cm
Maximum weight: 8.25 lbs (3.75kg)
AC Power: 100-240 Volts AC, 50/60 Hz, 50 watts
Operating temperature: 40° - 104° F (5° - 40° C)
Operating humidity: 20% - 80% non-condensing
Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
EMC: FCC Part 15, EN55022, EN55024, EN61000-2-3,
EN61000-3-3
Safety: UL60950, EN60950, AS/NZS60950
* Quintum product purchased separately.
** Not supported in initial software release.
[ Back ]
|
