Description: Auto-Switch Number. Used to set the number that will be dialed by other Tenors to initiate an Auto-Switch to this Tenor. It is important to understand that you are configuring the number that other Tenors will dial to call this Tenor for an Auto-Switch. This is not a number that this Tenor dials for Auto-Switch Also, this number must come in to the Tenor that it is configured on. For example, if a customer has 2 T1 lines and there is a Tenor on only one line. The Auto-Switch number that is configured on this Tenor is a number that can come in on either of the 2 T1 lines. There is a high probability that when a Tenor dials this number to initiate an Auto-Switch, the call could come in on the T1 line that the Tenor is not connected to; therefore, the Auto-Switch will fail. Also, when set to DID, the number configured here will never get passed to the PBX. This number becomes a Tenor resource/number. For the purposes of this section, the prompt will be shown as config pstntg 1# or config pbxtg 1#.
Cmd Type: command.
Prompt Level: config pstntg 1# and config pbxtg 1#
Syntax: asnumber or asnum {number}
Arguments: number The phone number, in international format (country code + city/area code + number) that other Tenors will call to initiate an Auto-Switch with this Tenor.
Default: Null.
Availability: Release 2 (p2-x-x) digital and analog Tenors. Only if asenable is set to yes (1)
Guidelines: See notes in the description. Typically only set on the PBX trunk group.
Examples:
config pstntg 1# asnumber 17324609999
Sets the Auto-Switch number for the first PSTN trunk group as 17324609999.
config pbxtg 1# asnumber 17324609999
Sets the Auto-Switch number for the first PBX trunk group as 17324609999.