Description: CAS E & M Incoming protocol. Used to configure the type of E & M protocol to use for incoming calls. When you are using E & M signaling, by far the most popular form of protocol is Wink Start. Always check with the customer and/or PSTN provider first though. For the purposes of this section, the prompt will be shown as config pstntg 1# or config pbxtg 1#.
Cmd Type: command.
Prompt Level: config pstntg 1# and config pbxtg 1#
Syntax: casenmincoming or casenmin {0 | 1 | 2 | 3 }
Arguments:
0 Wink Start.
1 Automatic dialing.
2 Immediate dialing.
3 Delay dialing.
Default: 0 - Wink Start.
Availability: Only if cassignaling is set to E & M (0). On all releases of Digital Tenors. Not available on Analog Tenors.
Examples:
config pstntg 1# casenmincoming 0
Sets the incoming E&M protocol to wink start for the first PSTN trunk group.
config pbxtg 1# casenmincoming 3
Sets the incoming E&M protocol to delay dialing for the first PBX trunk group.
Related Cmds: cassignaling, ccsorcas, casorient, casenmoutgoing