ccsorcas

Description: Used to configure the signaling type for this trunk group. Either CCS (ISDN) or CAS (robbed-bit) signaling. For the purposes of this section, the prompt will be shown as config pstntg 1# or config pbxtg 1#.

Cmd Type: command.

Prompt Level: config pstntg 1# and config pbxtg 1#

Syntax: ccsorcas or ccs {0 | 1}

Arguments:

0 CCS. Sets the signaling for this trunk group to CCS (ISDN).

1 CAS. Sets the signaling for this trunk group to CAS (robbed bit signaling).

Default: 1 - CAS

Availability: All Digital Tenor releases. Not available on the Analog Tenor.

Guidelines: If the Trunk Group is set for CCS (ISDN) Signaling, then only 1 PSTNTG or PBXTG may be created for this interface; Multiple Trunk Groups are not supported.

Examples:

config pstntg 1# ccsorcas 1

Sets the signaling for the first PSTN trunk group to CAS.

config pbxtg 1# ccsorcas 0

Sets the signaling for the first PBX trunk group to CCS (ISDN).