Description: Used to identify the dial plan for incoming calls to this trunk group (public or private). It is possible to only have only one dial-plan configured for incoming calls from either Trunk Group; however, both types of dial plans can be supported for calls that come in from the IP network. For the purposes of this section, the prompt will be shown as config pstntg 1# or config pbxtg 1#.
Cmd Type: command.
Prompt Level: config pstntg 1# and config pbxtg 1#
Syntax: dnused or dn {0 | 1}
Arguments:
0 Public dial plan. Calls coming in this trunk group will be Public.
1 Private dial plan. Calls coming in this trunk group will be Private.
Default: 0 - Public dial plan.
Availability: All releases of Tenor units.
Guidelines: None
Examples:
config pstntg 1# dnused 1
Calls coming in to the first PSTN trunk group will be tagged as Private.
config pbxtg 1# dnused 1
Calls coming in to the first PBX trunk group will be tagged as Private.