Description: Used to set what will be used and recognized by the Tenor as the end of dial digit. Typically a '#' is used for this feature. This feature is commonly supported in both PBXs and the PSTN. For the purposes of this section, the prompt will be shown as config pstntg 1# or config pbxtg 1#.
Cmd Type: command.
Prompt Level: config pstntg 1# and config pbxtg 1#
Syntax: enddialdigit {dig(0-9, *, #)}
Arguments: dig The digit (0-9, *, #) that will be interpreted by the Tenor as the end of the dial string.
Default: #.
Availability: Only when enddial is set to Yes (1) All releases of Tenor units.
Guidelines: This feature generally does not cause any problems if left enabled.
Examples:
config pstntg 1# enddialdigit *
Sets the end of dial digit to a * for the first PSTN trunk group.
config pbxtg 1# enddialdigit *
Sets the end of dial digit to a * for the first PBX trunk group.
Related Cmds: enddial, addenddialdigit