Description: Forced DN over IP Routing. Used to change the original called party number to fixed number that will route to a specific location regardless of what was dialed. This number is what the Tenor will use to route the call over IP. When this is set, the calls will only be allowed to route over IP. This feature is useful for the calling card application when you want all calls that enter the remote agent Tenors, to be routed to a main Tenor and out to an IVR for PIN verification, etc. This command is set at the call origination Tenor only and the number that is set here must match a DN at the destination Tenor. For example, if you set this command to 5551111, then the termination Tenor must have the same number, or a pattern that will match this number. For the purposes of this section, the prompt will be shown as config pstntg 1# or config pbxtg 1#.
Cmd Type: command.
Prompt Level: config pstntg 1# and config pbxtg 1#
Syntax: forcediprouting {dn}
Arguments: dn Required. Numeric string that will be used as the destination number for the Tenor to route the call over IP.
Default: Null
Availability: All Tenor units.
Guidelines: This parameter is set on the origination Tenor, and there must be a match on the IP network for the number that you set in order to route this call correctly. Used in conjunction with forcediproutingtype.
Examples:
config pstntg 1# forcediprouting 5551111
Sets any calls that come in the first PSTN trunk group with a destination number of 5551111 regardless of what was dialed.
config pbxtg 1# forcediprouting 6431234
Sets any calls that come in the first PBX trunk group with a destination number of 6431234.
Related Cmds: forcediproutingtype