Description: Forced DN over IP Routing type of number. Used to set the type of number (public or private) that the forcediprouting number will be. If you set this to public, then the destination Tenor must have a public matching number to route to. This feature is useful for the calling card application when you want all calls that enter the remote agent Tenors, to be routed to a main Tenor and out to an IVR for PIN verification, etc. This command is set at the call origination Tenor only and the number that is set here must match a DN at the destination Tenor. For example, if you set this command to 5551111, then the termination Tenor must have the same number, or a pattern that will match this number. For the purposes of this section, the prompt will be shown as config pstntg 1# or config pbxtg 1#.
Cmd Type: command.
Prompt Level: config pstntg 1# and config pbxtg 1#
Syntax: forcediproutingtype {0 | 1}
Arguments:
0 Public. The forcediprouting number set will be a public dial plan number.
1 Private. The forcediprouting number set will be a private dial plan number.
Default: 0 - Public
Availability: Only when forcediprouting is set. All Tenor units.
Guidelines: This parameter is set on the origination Tenor, and there must be a match on the IP network for the number that you set in order to route this call correctly. Used in conjunction with the forcediprouting.
Examples:
config pstntg 1# forcediproutingtype 1
Sets the configured forcediprouting number as a private dial plan on the first PSTN trunk group.
config pbxtg 1# forcediproutingtype 0
Sets the configured forcediprouting number as a public dial plan on the first PBX trunk group.
Related Cmds: forcediprouting