Description: This command is available in both the PBX and the PSTN trunk groups of the Tenor. It is used to activate the IP port-mapping feature. For more information about related applications, please refer to the IP Port Mapping Document in the "Customer Service" section of our website.
Cmd Type: Command
Prompt Level: config pstntg x# and pbxtg x#
Syntax: ipext {0 | 1}
Arguments:
0 Off. Feature is disabled.
1 On. Feature is enabled.
Default: 0 (Off)
Availability: Software Release 2 (P4-2-4) and higher of Analog & Digital Tenors.
Guidelines: For this feature to work properly, passthru on the PSTN trunk group should be set to "no". Also, the pttrunkID should be set to a value that is different than any ID used on the PBX side.
Examples:
config pstntg 1# ipext 1
Enables this feature.