Description: LAM Number Type. Used to define if the lampattern will use a public dial plan or a private dial plan. Numbers are matched, from the IP network, for this parameter based on the International number format (country code + city/area code + number).
Cmd Type: command.
Prompt Level: config pstntg n#
Syntax: lamnum {indx} {0 | 1}
Arguments:
indx Required. Numeric value that is the index number of the LAM pattern where the lamnum is to be associated with. Each lamnum must be matched with a LAM pattern.
0 Public. Sets the pattern to a public dial plan and will only match on public dial plan numbers.
1 Private. Sets the pattern to a private dial plan and will only match on private dial plan numbers.
Default: 0 - Public
Availability: Only when a lampattern is set. All Tenor units.
Guidelines: This feature is only used to route calls from the IP network out to the PSTN as hop-off calls. As mentioned above, numbers are matched to this parameter based on the International format (country code + city/area code + number).
Examples: For the example and the sample display, this Tenor will allow hop-offs or LAMs out of its PSTN connection. This Tenor is in New Jersey, USA (country code of 1 area code of 732) and will allow hop-offs to the local area, NY and to UK.
config pstntg 1# lamnum 1 0
Sets the dial plan as public for the pattern set in index 1.
config pstntg 1# lamnum 2 0
Sets the dial plan as public for the pattern set in index 2.
config pstntg 1# lamnum 3 0
Sets the dial plan as public for the pattern set in index 3.
Sample Display:
LAM: Index Pattern Replacement NumberType TON NPI
1 < 1732> < > 0 0 0
2 < 1212> < 1212> 0 0 0
3 < 4> < 0114> 0 0 0
Related Cmds: lampattern, lamreplace, lamnpi, lamton