Description: Determines in which language the IVR Voice Prompt files will be enabled (loaded) for this Tenor. As described in Quintum's RADIUS Technical Document, the prompt files are not actually "loaded" onto the Tenor, they are extracted & played on an as needed basis from an IVR Prompt Server. You will not be able to configure any ivrlanguage settings (PBXTG or PSTNTG), no IVR prompts will be played, and no IVR calls will be passed until this parameter is configured. You will not be able to specify more languages than are available in your system (found by typing "dis v" at the Quintum> prompt). It does not matter what order you type the languages in at this level. The determination of what files get played to the Users first will be done by the PSTNTG or PBXTG configuration.
Cmd Type: command.
Prompt Level: config ivr#
Syntax: loadlanguages or load {0|1|2|3|4|5|6}
Arguments:
0 English
1 Persian (Farsi)
2 Mandarin Chinese
3 French
4 Spanish
5 German
6 Arabic
Default: none
Availability: Analog & Digital Tenors, Software Release P4-2-4 and after.
Examples:
config pstntg 1# loadlanguages 2
Enables Mandarin Chinese prompt files to be used.
config pstntg 1# load 4 0
Enables Spanish & English prompt files to be used.
Note
If you wish to change what languages get used by this Tenor, you must first disable the language at all PBXTG/PSTNTG prompt levels, and then "load" the language here. If you do not do this first, the following error message will result.
ERROR: the following languages are in use: 0
Remove the language(s) from the trunk groups and repeat the command again.
Related Cmds: ivrlanguage