MasterChassis-1 (mc 1) Prompt Commands

Description

The MasterChassis prompt commands pertain to the settings under Site. The commands at this level enable you to configure the Clock Source and SNMP Trap information.

Guidelines

Clocking commands are Digital-only.

It is important to ensure that there is a single clock source at each location. Failure to follow this may result in poor voice quality.

Configuration Manager

Location

Clocking

Tenor DX

Systemwide Configuration > System Clock

Tenor CMS

Systemwide Configuration > Chassis

SNMP

Systemwide Configuration > SNMP Server

Options

Clock Source (Primary and Secondary

Select from the drop-down box. Options are as follows:

Internal

Digital Line (Select this option to display the Clock Line ID field.)

Clock Line ID

Select from the drop-down box of available Digital Interfaces.

SNMP General options

Enter the IP addresses for the SNMP traps.

SNMP System Info

Enter the SNMP ID information in the text fields.

Command Line

Cmd Type	Prompt
Prompt Level	config#
Syntax	masterchassis or mc 1
Examples	config- MasterChassis-1# show -a MasterChassis-1 : Type : 0 SNMPSysLocation : <Not Set> Location info for SNMP SNMPSysContact : <Not Set> Contact info for SNMP SNMPSysDescription : <Not Set> System desc. for SNMP SNMPSysName : <Not Set> System name for SNMP SNMPTrapIP1 : 0.0.0.0 SNMPTrapIP2 : 0.0.0.0 SNMPTrapIP3 : 0.0.0.0 SNMPPublicCommunity : (Not Set) id information IVRFileServer-1 FlexibleIVRServer-1 TunnelServerInfo-1 SYSLogServer-1 CDRServer-1 CDRServer-2 CDRServer-3 CDRServer-4 SLot-SL1 SLot-SL2 NMSServer-1 DNSServer-1 RadiusInfo-UserServer RadiusInfo-EndpointServer RadiusInfo-RoutingServer