RelayANI

Description

This command controls whether the ANI of a call outbound on this signaling group has its ANI value relayed or suppressed. The default is to relay the ANI value.

There is a command with the same name in the IPRG, ISDNSG and CASSG. See the links below.

Guidelines

The SS7 Signaling Group prompt is only available for Tenor CMS, code version P103-00-00 or later.

Valid values are as follows:

0   ANI is not relayed on outbound calls through this routing group.

1   ANI is relayed on outbound calls through this routing group (default).

2   ANI is relayed, but uses the TON and NPI values from DefaultANITON and DefaultANINPI.

Related Topics

SS7SignalingGroup-1 (ss7sg 1) Prompt Commands

DefaultANI

DefaultANITON

DefaultANINPI

RelayANI (IPRG)

RelayANI (CASSG)

RelayANI (ISDNSG)

Location

Circuit Configuration > Signaling Configuration > SS7 Signaling Groups > SS7 Signaling Group-n > Relay ANI

Options

Select from the drop-down box. Options are as follows:

• Disabled

• Relay ANI

• Relay Default ANI TON/NPI

Cmd Type

Command

Prompt Level

config-SS7SignalingGroup-1# 

Syntax

set RElayANI or reani { 0 | 1 | 2 }

Arguments

0   ANI is not relayed on outbound calls through this routing group.

1   ANI is relayed on outbound calls through this routing group.

2   ANI is relayed, but uses the TON and NPI values from DefaultANITON and DefaultANINPI.

Default

1   ANI is relayed

Examples

config-SS7SignalingGroup-1# set reani 0

Sets ANI not to be relayed for calls through this routing group.