RXGain

Description

This analog-only parameter lets you set the decibel level of receive gain.

There is a command with the same name in the IPRG. See the link below.

Guidelines

The numeric value is the dB level set in 1 dB increments. The range is -6 dB to 6 dB.

The function and default setting differ depending on whether it is the Phone or Line group.

• CASSignalingGroup-Phone: Used to raise or lower the gain <volume> of signals going out on the phone-side (Tenor -> PBX). Default is  -6 dB.

• CASSignalingGroup-Line: Used to raise or lower the gain <volume> of signals coming in on the line-side interface (PSTN -> Tenor). Default is 6 dB.

Related Topics

TXGain

RxGain (IPRG)

Location

Circuit Configuration > Signaling Configuration > CAS Signaling Groups > CAS Signaling Group-n > Analog Specific tab > Rx Gain

Options

Select from the drop-down box. Options are -6 dB to 6 dB (all numbers in this range, inclusive).

Cmd Type

Command

Prompt Level

config-CASSignalingGroup-1#  

Syntax

set rxg {num}

Arguments

dB; Range -6..+6

Default

6 dB (cassg-line)

-6 dB (cassg-phone)

Examples

Config-CASSignalingGroup-1# set rxgn 2

Sets the receive gain to +2 dB.