RejCallNoANI

Description

This setting allows you to reject inbound calls that do not contain ANI (Caller ID) information.

When this setting is enabled, it displays two additional settings.

• The cause code for the rejection is set in CauseRejNoANI.

• The minimum acceptable length of the ANI is set in MinimumAniLength.

Guidelines

Valid settings are as follows:

• 0 - Disabled - accept all calls (default)

• 1 - Reject calls of short/no ANI

• 2 - Route calls of short/no ANI to IVR

This command has limited use, but is available primarily for situations where ANI information is required for billing purposes.  

Related Topics

CauseRejNoANI

MinimumANILength

Q.931 Disconnect Cause Codes

Location

Circuit Configuration > Signaling Configuration > SS7 Signaling Groups > SS7 Signaling Group-n > Reject No-ANI Calls

Options

Select an option from the dropdown box. Valid options are as follows:

• Disabled

• Reject calls of no/short ANI

• Route Calls of short/no ANI to IVR

Cmd Type

Command

Prompt Level

config-SS7SignalingGroup-1# 

Syntax

set RejCallNoANI or rcnani { 0 | 1 }

Arguments

0   Accept all calls  

1   Reject calls with no ANI information present  

2   Route calls of short/no ANI to IVR

Default

0   Accept all calls

Examples

config-SS7SignalingGroup-1# set rcnani 1

The system will reject inbound calls that do not contain ANI.