RElayANI

Description

The RElayANI command controls whether the ANI of a call outbound on this signaling group will have its ANI value relayed or suppressed.

There is a command with the same name in the ISDNSG and IPRG. See the links below.

Guidelines

This command is only available on a Digital Tenor.

Valid settings are as follows:

• 0 - ANI will not be relayed.

• 1 - ANI will be relayed (default).

• 99 - ANI will be picked from the "anilist.txt" file that you have created. See the Note under the RelayANI topic in the ISDNSG (link below).

Related Topics

DefaultANI

RelayANI (IPRG)

RelayANI (ISDNSG)

RelayCallingNAMe - CAS Signaling Group

Location

Circuit Configuration > Signaling Configuration > CAS Signaling Groups > CAS Signaling Group-n > General tab > Relay ANI

Options

This feature is enabled by default. Click the checkbox to disable this feature.

Cmd Type

Command

Prompt Level

config-CASSignalingGroup-1#  

Syntax

set RElayANI or reani {1 | 0}  

Arguments

0   ANI will not be relayed on outbound calls through this signaling group.

1   ANI will be relayed on outbound calls through this signaling group.

99  ANI will be picked from the ANI pool you have created.

Default

1   ANI will be relayed  

Examples

config-CASSignalingGroup-1# set reani 0

Sets ANI not to be relayed for calls through this routing group.