The following parameters have been used in at least one instance and have worked in the country specified. Quintum cannot guarantee that these parameters will work in every situation within the country listed due to in-country switch types, application needs and changing technology. Always verify these with your provider. For more information on R2, please refer to the R2 Overview available on our website. The settings shown are for both 1st and 2nd generation Tenors. |
| R2 Parameter |
Settings |
1G Tenor Command |
2G Tenor Command |
| CD-Bits |
0000 |
set cdbit 0 |
|
| Invert-Bits |
0000 |
r2sig 0 0 |
set iabcd 0 |
| DNIS Length |
Variable |
set dnisl 0 |
|
| Answer Tone |
A-3 |
set and 3 |
|
| Send 1st Digit |
Not Used |
r2dnis 0 3 0 |
set s1d 0 |
| Group B Xmt Idle Tone |
B-6 |
set gis 6 |
|
| Group B Xmt Busy Tone |
B-3 |
set gbs 3 |
|
| Group B Rcv Idle Tones |
B-6 |
set girb 32 |
|
| Group B Rcv Busy Tones |
B-3 |
r2group 6 3 32 4 |
set gbrb 4 |
| ANI Request |
After 1st digit |
set rani 1 |
|
| ANI Length |
Variable |
set anil 0 |
|
| ANI Category Request Tone |
A-5 |
set rcd 5 |
|
| ANI Tone Request |
A-5 |
r2ani 1 0 5 5 |
set ranid 5 |
| ANI Category |
I-1 |
set a6c 1 |
|
| ANI Calling Party Category |
II-1 |
r2categ 1 1 |
set a3c 1 |
| Seizure Ack Timeout |
150ms |
set sat 150 |
|
| Release Guard Timeout |
600ms |
r2time 150 600 |
set rgt 600 |
| Comments |
1 Always double-check the DNIS length with your carrier. |
||